Well, in plain speaking language it refers to number of times the wires are wrapped around the armature. A 13 turn double would be 2 strands wrapped 13 times. A 13 turn single would be 1 wire wrapped 13 times. The double wires have more torque where as single wires have more speed. In general, it means that more turns means more torque but less speed and vice versa. That’s lower turns means lower torque and u https://SlotsPalace.id https://dafabets.id https://1xbets.id https://Bk8bet.id https://tgcasino.id https://pokerist.id https://Cobrabet.id https://slotstemple.id https://bets365.id https://Betinasia.id greater RPM. The number of winds describes how abruptly the motor accelerates. Fewer winds would mean less abrupt acceleration and more winds would lead to smoother accelerations.
Torque basically refers to how much a force is acting on motor that causes motor to rotate. If there is more than one force acting on a motor then each of these forces shall apply torque. The net torque acting upon the motor shall be the sum total of all the forces or torques acting upon a motor. It is usually required for cars racing on the twisted tracks.
Remote control cars come with two kinds of motors: the ones with brush and ones without i.e. Brushless. The brushless motor has windings located around the outside of the motor and the magnets are located on the moving motor shaft. A brushless motor does not provide any friction therefore provides higher RPM. But a brushless requires a lot of processing power that’s why it has not been a great success with RC trucks or cars.
The slot less and brushless motors are third generation motors. With slot less design, motor can achieve higher efficiency, torque, fast response time and longer life time with greater with zero maintenance. Cogging problem is also eliminated even at lower speed operation. But since there is a lot of research and development involved in their development they come out as expensive solution in case of RC cars.